WELCOME TO EXCEL Suspension! PLEASE NOTE - We carry most leading suspension brands, many not yet on our site, please contact us if you don't see what you are looking for, its likely we have it or can get it for you! WE ALSO OFFER FREE SHIPPING IN THE LOWER 48 UNITED STATES*!!!!

46-206084 - FULLY ASSEMBLED - Bilstein 6112 Front Strut / Coilover Set fits Toyota Tundra's & Sequoia's!
46-206084 - FULLY ASSEMBLED - Bilstein 6112 Front Strut / Coilover Set fits Toyota Tundra's & Sequoia's!
Shown with optional Built Right Upper Control Arms
46-206084 - FULLY ASSEMBLED - Bilstein 6112 Front Strut / Coilover Set fits Toyota Tundra's & Sequoia's!
46-206084 - FULLY ASSEMBLED - Bilstein 6112 Front Strut / Coilover Set fits Toyota Tundra's & Sequoia's!
46-206084 - FULLY ASSEMBLED - Bilstein 6112 Front Strut / Coilover Set fits Toyota Tundra's & Sequoia's!

46-206084 - FULLY ASSEMBLED - Bilstein 6112 Front Strut / Coilover Set fits Toyota Tundra's & Sequoia's!

Regular price
$895.00
Regular price
$999.95
Sale price
$895.00
Unit price
per 
Availability
Sold out
Shipping calculated at checkout.

UPDATE MAY 2022 - VERY LIMITED STOCK!

****Please note that as of May 1st 2022 we have a limited on supply of these kits, please contact us****

Due to current market conditions, demand for these kits is outpacing supply.  The only way to guarantee a kit in the near future is to “Pre-Pay” your order.  Pre-Paid orders are outpacing the “No Charge Wait List” that we have managed for years with great success.  With that said, our best recommendation is to pre-pay your order and take parts as they become available.  Without Pre-Payment, we cannot guarantee that you will get a kit on the next run. 

EXCEL Suspension is one of the largest stocking 6112 kit distributors in the country and is getting kits on a fairly regular basis, and this changes daily.  Please contact us with your project so we can discuss your options. 

If you would like to get on the “No Charge” wait list, click on the link below.  Please keep in mind that due to demand and the number of pre-paid orders, there is no guarantee that you will get a kit on the next production run.   We will reach out to you as quickly as possible to discuss your order! 

This item does not qualify for free shipping, please contact us to discuss your shipping options.

PLEASE CLICK ****HERE**** TO PLACE A KIT ON BACKORDER, NO DEPOSIT REQUIRED!!!!

https://www.excelsuspension.com/collections/2007-2020-toyota-tundra/products/46-206084-bilstein-6112-kit-2007-2020-toyota-tundra-wait-list

46-206084 Bilstein 6112 Suspension Kit – Fully Assembled with premium quality OEM style top mounts for a direct, bolt on installation.

Product Applications:

  • 2007-2021 Tundra 2wd & 4wd Models (Ride Heights Vary)
  • 2008-2021 Sequoia 2wd & 4wd Models (Ride Heights Vary)

Product Features

  • Don’t be fooled, while this system is designed for the serious off-roader, this kit works exceptionally well on the street, absorbing rough roads, pot holes, and speed bumps with ease!  The all new BILSTEIN 6112 Series Kit is the ultimate suspension solution for your Toyota Tundra or Sequoia!
  • The 6112 Series Assembly Package optimizes off-road and on-road capabilities with a massive 60mm (approx. 2.5”) digressive piston for increased damping control. This kit features specially designed cold wound springs and an adjustable spring seat which allows for vehicle leveling, larger tires, and increased ground clearance.
  • The front assembly kit comes with (2) 60mm shocks (2) springs, (2) billet spring seats, and (2) upper strut mounts and mount hardware. The 6112 is a direct bolt on application for late model 2007 – 2020 Tundra’s and 2008-2020 Sequoias which utilize a factory strut / coilover suspension.
  • The 6112 Assembly Package is for the front application only. To maximize performance, we highly recommend a 5160 Series remote reservoir shock and performance spring pack for the rear, please contact us for special package pricing details!

Technical Details

    • Ride Heights are Adjustable from .75” up to over 3” Inchs of lift based upon 2wd vs. 4wd, Tundra or Sequoias – See Ride Height Chart Below – Please note: Ride heights listed are typical and can vary from 1 vehicle to the next depending on the chassis configuration and aftermarket accessories such as bumpers and winches.
    • Massive 60mm monotube design for increased oil capacity, cooling, and long-term durability
    • 60 millimeter digressive piston for improved ride comfort and control over rough terrain
    • Custom engineered cold wound linear springs for enhanced vehicle control
    • Monotube design for consistent, fade-free performance
    • Better then OEM Style High Quality Rubber Upper & Lower Bushing Mounts provide superior fitment and a noise free ride.
    • LIMITED LIFETIME WARRANTY!
    • MADE IN THE USA!

Ride Height Specifications (Ride heights listed are typical and can vary from 1 vehicle to the next depending on the chassis configuration and aftermarket accessories such as bumpers and winches).

07-20 Tundra 4x4 Assembly Options

#1 Fully Assembled w/ New Upper Strut Mounts – Choose .75” Lift

#2 Fully Assembled w/ New Upper Strut Mounts – Choose 1.3” Lift

#3 Fully Assembled w/ New Upper Strut Mounts – Choose 1.9” Lift

#4 Fully Assembled w/ New Upper Strut Mounts – Choose 2.5” Lift

07-20 Tundra 4x2 Assembly Options

#1 Fully Assembled w/ New Upper Strut Mounts – Choose 1.5” Lift

 #2 Fully Assembled w/ New Upper Strut Mounts – Choose 2.1” Lift

#3 Fully Assembled w/ New Upper Strut Mounts – Choose 2.7” Lift

#4 Fully Assembled w/ New Upper Strut Mounts – Choose 3.3” Lift

08-20 Sequoia 4x4 Assembly Options

#1 Fully Assembled w/ New Upper Strut Mounts – Choose 2.1” Lift

#2 Fully Assembled w/ New Upper Strut Mounts – Choose 2.7” Lift

#3 Fully Assembled w/ New Upper Strut Mounts – Choose 3.3” Lift

#4 Fully Assembled w/ New Upper Strut Mounts – DO NOT USE

08-20 Sequoia 4x2 Assembly Options

#1 Fully Assembled w/ New Upper Strut Mounts – Choose 2.6” Lift

#2 Fully Assembled w/ New Upper Strut Mounts – Choose 3.3” Lift

#3 Fully Assembled w/ New Upper Strut Mounts – DO NOT USE

#4 Fully Assembled w/ New Upper Strut Mounts – DO NOT USE